Based in Leesburg, VA

Sump Pump Installation and Repair in Leesburg, VA

Sump pump installation and repair in Leesburg, VA for basements and crawl spaces that collect water after heavy rain.

Request an estimate

Tell us what you need

Keeping Water Out of the Lowest Level

For sump pump installation and repair in Leesburg, VA, Brick Street sends licensed plumbers who can replace a dead pump, add a pit to a basement that never had one, or figure out why an existing pump runs constantly. A sump pump collects groundwater in a pit below the floor and pushes it out of the house before it reaches the slab. When it fails during a storm, the basement is the first thing to go. We answer 24/7 with no overtime fees, so call (240) 969-4911 if water is rising now.

Loudoun County gets heavy summer thunderstorms and wet spring stretches, and finished basements are common in the area's newer subdivisions. That combination means a failed pump damages carpet, drywall and stored belongings, not just bare concrete. A dry lower level also keeps humidity and mold down, which helps the air in the rest of the house. Read more about installing a new sump pump or repairing one that has stopped keeping up, and see our plumbing services for related work.

WHAT A PUMP DOES

Why Basements and Crawl Spaces Need One

Even good gutters and grading cannot stop all groundwater. After a soaking rain the water table rises, and water moves through soil toward the lowest open space it can find, which is often your foundation. Drain tile around the footings carries that water to the sump pit, and the pump lifts it out through a discharge line. Without a working pump, that water seeps through floor cracks and wall joints. Over time, constant dampness feeds mold and mildew, warps finished flooring and can weaken the foundation itself. Crawl spaces have the same problem in a smaller footprint, with the added risk of wet insulation and wood framing.

Getting a Sump System Right

The steps we follow on an install or a replacement.

Pick the right spot

The pit belongs at the low point where water collects, away from foundation footings and with a clear route for the discharge line.

Match the pump to the water

We size the pump for how much water the pit takes in and how high it has to lift it, and choose between pedestal and submersible styles.

Route the discharge

Water has to land far enough from the house that it does not soak back toward the foundation. A check valve keeps it from draining back into the pit.

Add backup protection

Storms knock out power when you need the pump most. A battery backup or secondary pump keeps the pit draining during an outage.

Follow local code

Discharge rules and electrical requirements differ by locality. We check what applies at your address and install to it.

Test before we leave

Every install ends with filling the pit until the pump starts, so you see it empty the water and shut off on its own.

UPKEEP

A Five-Minute Sump Check Before Storm Season

Lift the lid and look for debris, gravel or silt in the pit, since it can jam the float or clog the intake. Slowly pour a bucket of water into the pit and watch the float rise and the pump kick on, empty the pit and shut off cleanly. Outside, make sure the discharge pipe is clear and not frozen or buried. If the pump hums but does not move water, runs without stopping, or cycles every few seconds, schedule a sump pump repair before the next storm. We serve Leesburg and surrounding towns.

Water Coming Up Through the Floor?

We take sump calls day and night.

Call (240) 969-4911 and a licensed plumber will help get the pit draining again. Meanwhile, move valuables off the floor and keep extension cords out of standing water.

Open now · 24/7

(240) 969-4911

Based in Leesburg, VA.

4.6 from 282 Google reviews

Call now Request an estimate

Frequently asked questions

How do I know if my sump pump is working?

Pour a bucket of water slowly into the pit. The float should rise, the pump should start, empty the pit and shut off on its own. If nothing happens, check that it is plugged in and the outlet or GFCI has not tripped. A pump that hums without moving water, or one that runs nonstop when the pit is nearly empty, needs a technician to look at the switch, impeller or check valve.

Do I need a battery backup sump pump in Leesburg?

If your basement is finished or stores anything you care about, a backup is a good idea. The heaviest rain often comes with thunderstorms that cut power, and a standard pump stops the moment the power does. A battery backup unit sits in the same pit and takes over during an outage or if the main pump fails. Water-powered backups are another option for homes on public water.

Why does my sump pump run all the time?

Constant running usually means a stuck float switch, a failed check valve letting water fall back into the pit, or a pump too small for the amount of water coming in. A high water table after days of rain can also keep it busy for a while. If it runs with little or no water in the pit, shut it off to protect the motor and call us.

Can a sump pump be added to a basement that does not have one?

Yes. Installing a new system means cutting the floor at the low point, digging and lining a pit, and often adding drain tile so water reaches it. Then the pump, check valve, discharge line and a dedicated outlet go in. It is real construction work, so we look at where water enters and how the basement is finished before recommending a layout.

Tell us about the job

Your name, your number and what needs doing. A person from Brick Street Plumbing Heat & Air gets back to you.

Send the basicsYour name, your number and what needs doing. Three fields, about a minute.
A person gets back to youSomeone from Brick Street calls or texts you within one business day.
We book a time that suits youYou get a time that fits your day, and no obligation until you say go.

Rather talk now?(240) 969-4911Open 24/7, same rate any hour

Request an estimate

Takes about a minute